No. | Name | Item | Spec./model |
1
| Extruder | Screw dia. mm | 75、90、105、120、135、150、170、180、200、250、300 |
L:D : L/D | 55 | ||
Drive motor speed control mode | Frequency controller | ||
The heater form | Far infrared heating or cast aluminium heater | ||
Heating zone and temperature control type | 12 or 14 zones automatic temperature control | ||
Cooling method | Water cooling | ||
2 | Butane pump | Model | Single cylinder piston metering pump |
Rated flow l/h | 40、63、80、100、120、160 | ||
Outlet pressure Mpa | ＞25 | ||
Motor power kw | 3-4 | ||
3 | Monostearin pump | Model | Single cylinder piston metering pump |
Rated flow l/h | 3.8、6、8、10、12 | ||
Outlet pressure Mpa | ＞25 | ||
Motor power kw | 0.75、1.1、1.5 | ||
Monostearin pot capacity l | 7 | ||
4 | Machine head | Machine head spec. mm | 75、90、105、120、135、150、170、180 、200、250、300 |
Heater form | Cast aluminium heater | ||
Heating zone and temperature control type | 2 zones automatic temperature control | ||
Cooling style | Water cooling | ||
5 | Sizing and cutting | Sizing drum size mm | 800—1500（or customer order） |
Wind ring dia. mm | 500—700（based on customer request） | ||
The fan motor power kw | 0.75 | ||
Sizing drum motor power kw | 0.55 | ||
Cutting device motor power kw | 0.18 | ||
Blade diameter mm | 200-240 | ||
6 | Traction | Pulling roll diameter. mm | 270—320 |
Pulling motor power kw | 1.5(speed control) | ||
speed ratio of reducer | 15 | ||
7 | Rolling machine | Rolling style | Double-station rolling |
Torque motor capacity Nm | 10 | ||
Filp motor power kw | 0.55 | ||
Metering length method | Automatic metering device | ||
Max. Rolling diameter mm | 1500 |
